Changes

Okidata Microline 320 Turbo

665 bytes added, 19:01, 28 September 2015

→‎direct write

[[Home =Arduino control=*parallel port interface*arduino nano with ethernet shield.=direct write=*with newline: <syntaxhighlight lang="bash">echo "works just fine" | nc 192.168.1.101 1000</syntaxhighlight>*without newline: <syntaxhighlight lang="bash">echo -n "works just fine" | nc 192.168.1.101 1000</syntaxhighlight>*printf: < back syntaxhighlight lang="bash">printf " keep on going" | nc 192.168.1.101 1000</syntaxhighlight>=echo to Wiki Home]/dev/usb/lp0=*change rules so device loads R/W*edit /lib/udev/rules.d/50-udev-default.rules*add line:<syntaxhighlight lang="bash">KERNEL=="lp[0-9]*", GROUP="lp", MODE="0666"</syntaxhighlight> 

=Okidata Microline 320 Control=

*http://my.okidata.com/MAN390HB.NSF/MOCContents/4F6AD49DB70B93F6852562F400594112?OpenDocument

*http://www.myokidata.com/MANTR320.NSF/MOCContents/E106A4737149EFB9852561B7006D2384?OpenDocument

*http://wwwmy.myokidataokidata.com/MANTR320MAN-ML320-1TURBO-N.NSF/MOCContentsWebBPXContents/E58273CE19485977852561B7007677605E8F9A6F259F89F185256A710048FD40?OpenDocument

=OS X=

Command Line printer management

*http://www.techrepublic.com/article/control-printers-in-linux-from-the-command-line/5055067

 

=Arduino=

*http://forum.arduino.cc/index.php?topic=74776.0

• ← Older edit

Rtwomey

Bureaucrat, administrator

5,710

edits