Difference between revisions of "Students/KristenZwicker"

Revision as of 17:44, 3 March 2010

I am currently in my senior year at UCSD, majoring in ICAM Music. I originally got into the major thinking that it would provide me with a fair amount of sound engineering skills. By and large, it hasn't. However, I've managed to pick up some useful knowledge and along the way have been exposed to some very interesting art practices. It has definitely expanded my view of art, as well as the range of my own work. In this course I hope to explore circuit bending, though I am interested and excited to learn about manipulating electronic devices in general.

1.

2.

3.

4.

5.

6.

7.

Midterm Project:

For my midterm project, I installed a speaker box that tells a narrative based on the song “Mary Had A Little Lamb” in a jacket. I removed the apparatus from a book with a little stuffed lamb that read the story aloud. Originally, a magnet embedded in one of the lamb’s feet was used to close the circuit, which was embedded in another foot, and ultimately trigger the speaker. I simply cut both of the wires, removing the magnetic component, and attached one wire to each half of the button enclosure on the front pocket of the jacket. . So, when the pocket is closed, the circuit is closed also, prompting the speaker to tell the story. In hindsight, I could have kept the magnetic component, attaching it to one half of the button, but alas, this occurred to me all too late.

The jacket, appropriately, is lined with a material that simulates sheepskin. If possible, I would have preferred to use a piece of clothing that incorporated actual sheepskin, or wool. Ideally, I would have loved to use a pair of Ugg boots. Unfortunately I do not own any such items. Aesthetically, however, I feel that this jacket makes the proper point. It puts a new spin on the words, “Mary had a little lamb, whose fleece was white as snow. And everywhere that Mary went, the lamb was sure to go.”

Final Project Proposal:

I would like to wire an electret microphone to a motor in a small toy car, and have the analog input mapped to the digital output, such that the louder the audio signal, the higher the voltage, and the faster the car would drive. Hopefully, this will give the feeling that the car is either scared of, or excited by, the sound, depending on the situation (ex: shouting at it vs. letting it go at a concert). It might also be beneficial to introduce a range finding sensor, so it doesn't just run straight into a wall. Maybe if it senses something ahead it could just turn right or left some amount. Wouldn't solve the problem entirely, but might help a bit. The erratic turning may also help in crafting a frenzied appearance.