Difference between revisions of "Students/Tung Mach"

From Robert-Depot
Jump to: navigation, search
(Midterm Project Proposal)
(Final Project Proposal)
Line 49: Line 49:
  
 
I will be using Arduino to produce the code that will work with my robot. The robot won't actually have any movement to move, it will be stationary. However, I will controlling the robot's body, like moving the body for an example. I will also probably add lights and sounds to the robot, so a button would probably activate the lights.
 
I will be using Arduino to produce the code that will work with my robot. The robot won't actually have any movement to move, it will be stationary. However, I will controlling the robot's body, like moving the body for an example. I will also probably add lights and sounds to the robot, so a button would probably activate the lights.
 +
 +
http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs401.snc3/24329_1288317641296_1030830148_30803189_5324550_n.jpg
 +
 +
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1288317721298_1030830148_30803191_3231918_n.jpg
  
 
== Final Project Documentation ==
 
== Final Project Documentation ==

Revision as of 05:21, 5 March 2010

Tung Mach (January 15, 1989), better known by his preferred name Lance, is a 3rd year undergraduate student at the University of California, San Diego, currently majoring in both Interdisciplinary Computing and the Arts and Computer Science and Engineering.

Early Life

Lance received his diploma at Alameda High School, where he was involved in many clubs, and was the varsity of the badminton club for all 4 years. After his graduation, he decided to attend a community college in order to shorten his college expenses. In shortly after 2 years, he soon transferred into the University.

Personal Life

Lance was cool. He's still cool. Everyone likes him.

Electronic Technologies for Art I

In the quarter of Winter 2010, Lance registered for a class called Electronic Technologies for the Art with Robert Twomey, due to his passion for electronics. Lance finds the class intriguing because he likes the work behind electricity and the process of assembling. Though, Lance doesn't have any knowledge nor previous experience with electronics, he hopes to gain the intelligence to strengthen his creative mind in the art and perhaps acquire a new hobby.

Field Research

stock-market-exchange.jpg Stock Market

flight-delayed.jpg Airport Terminal

NYC_Times_Square.jpg New York Time Square

computer-chip.jpg Processor

disney-wall-e-remote-control-robot-toy.jpg Wall*e


Midterm Project Proposal

"For this upcoming midterm project, there are a few ideas that came to mind, but I can’t decide yet on which I want to do. My very first idea was an anti-theft device mechanism, which can be installed into a product. If one was to steal and open a product, a sensor would go off, alarming others. My second idea could be a simple mouse trap, where if a mouse gets near one, it would get caught and a loud sensor would go off. This would alert the owner of the house, can quickly dispose of the rat, and reinstall it again. My third idea is a mini elevator, which I could incorporate the knife switch into my project. If I turn the switch up, it would move the elevator up, switching it down would move it down.

When it comes to looks, my first idea would probably look like a CD case, or some kind of box. Being a closed switch, if one was to open it, a button would be released, allowing the circuits to connect to set off the alarm. Upon looking inside the box, you can see all the mechanics that are made up into this anti-theft system. My second idea would simply be a mouse trap, probably with lights and sounds coming out of it. My third idea would probably involve the most work, building a small elevator and having at least two floors with a switch."

24329_1288317681297_1030830148_30803190_4434777_n.jpg

The Midterm Project

When I wrote my project proposal, I had a lot of ideas that I wanted to do, but not everything went well. I decided to start off with some new ideas from scratch. Then suddenly, I came up with something. I decided to make a netbook cooler, as no company has made one yet. The purpose of this cooler is to decrease the temperature of the netbook by fanning below . This project is simple, but yet simple. The cooler will have two features, an automatic switch so when a netbook is placed on top, the cooler will automatically start fanning, and a turning knob to adjust the speed of the fan. The cooler was easy to make, I placed the red switch on top of the box, so that way when something is pressed against it, it would connect the circuit all together, making the fan spin. I placed the knob on the back so adjust the volume of the fan, which is also connected to the circuit. The turning knob is also known as a potentiometer, it can be treated as a resistor as you can change the volume of the electricity flowing through the motor that is rotating the fan. The box is actually made out of a cereal box, wrapped with black construction paper. Inside the box, the circuit board is placed in the back, which also connects the wire from the battery, potentiometer (turning knob), and the switch button. Upon use, this product actually works. Though, it will only fit netbooks only, it still cools down the netbook slightly. The unique feature about this cooler is that it doesn't require USB to connect to a netbook, as it could run on either battery for high mobility or simply through AC power.


22779_1263308816091_1030830148_30747202_990259_n.jpg Front View 22779_1263308856092_1030830148_30747203_6125969_n.jpg Back View 22779_1263308896093_1030830148_30747204_5043710_n.jpg Netbook placed on top of the cooler

Final Project Proposal

For my final, I would like to propose a project that is related to the topic of Bionic Arduino. The definition on bionic means having normal biological capability or performance enhanced by or as if by electronic or electromechanical devices. I would like to get a 3-axis accelerometer that would be able to control a robot by just tilting and or rotating the accelerometer. With the accelerometer, I will be able to measure proper acceleration, detecting magnitude and direction of the acceleration as a vector quantity, and can be used to sense orientation, vibration and shock.

I will be using Arduino to produce the code that will work with my robot. The robot won't actually have any movement to move, it will be stationary. However, I will controlling the robot's body, like moving the body for an example. I will also probably add lights and sounds to the robot, so a button would probably activate the lights.

24329_1288317641296_1030830148_30803189_5324550_n.jpg

24329_1288317721298_1030830148_30803191_3231918_n.jpg

Final Project Documentation

This section is going under construction.

Five pictures will be posted up. Project source code will be posted.