Difference between revisions of "Bluetooth Headtracker"
(→GY-86) |
|||
(11 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | |||
+ | <h1>NOTE: this has been superceded by https://github.com/roberttwomey/bluetooth-headtracker. Please go there for supercollider code, etc.</h1> | ||
+ | |||
https://farm9.staticflickr.com/8567/16281491925_66cc3868bf.jpg | https://farm9.staticflickr.com/8567/16281491925_66cc3868bf.jpg | ||
+ | |||
+ | A bluetooth, rechargeable, 10DOF head-tracking device for use with the [http://www.ambisonictoolkit.net/ Ambisonic ToolKit (ATK)], motion capture, and [[Pan-Tilt]] camera systems. This is the second prototype. | ||
+ | |||
+ | __TOC__ | ||
=Hardware= | =Hardware= | ||
Line 37: | Line 44: | ||
==Python== | ==Python== | ||
Simple python program to read from the IMU headtracker and record to file. Additionally opens second serial device and feeds values to pan-tilt camera in matching orientation. | Simple python program to read from the IMU headtracker and record to file. Additionally opens second serial device and feeds values to pan-tilt camera in matching orientation. | ||
+ | |||
[[:File:head_through.zip]] | [[:File:head_through.zip]] | ||
Line 45: | Line 53: | ||
https://farm8.staticflickr.com/7538/16255567716_410f1b46dc_z_d.jpg | https://farm8.staticflickr.com/7538/16255567716_410f1b46dc_z_d.jpg | ||
+ | ==3d Printing== | ||
Solidworks Files - [[:File:btht_solidworks.zip]] | Solidworks Files - [[:File:btht_solidworks.zip]] | ||
STL Files - [[:File:btht_enclosure_stl.zip]] | STL Files - [[:File:btht_enclosure_stl.zip]] | ||
+ | ==Assembly Instructions== | ||
=Reference= | =Reference= | ||
− | ==other intertial | + | ==other intertial Measurement Units== |
Head-tracking with the MPU6050 | Head-tracking with the MPU6050 | ||
Line 60: | Line 70: | ||
Example with Arduino Nano | Example with Arduino Nano | ||
*http://www.geekmomprojects.com/mpu-6050-dmp-data-from-i2cdevlib/ | *http://www.geekmomprojects.com/mpu-6050-dmp-data-from-i2cdevlib/ | ||
− | + | ||
+ | GY-80 | ||
*https://github.com/vshymanskyy/GY80 | *https://github.com/vshymanskyy/GY80 | ||
− | + | ||
+ | GY-86 | ||
*http://amzn.com/B00KDMJBFK | *http://amzn.com/B00KDMJBFK | ||
Latest revision as of 13:33, 15 December 2016
NOTE: this has been superceded by https://github.com/roberttwomey/bluetooth-headtracker. Please go there for supercollider code, etc.
A bluetooth, rechargeable, 10DOF head-tracking device for use with the Ambisonic ToolKit (ATK), motion capture, and Pan-Tilt camera systems. This is the second prototype.
Contents
Hardware
Built with simple, ready to order parts from common suppliers. Purchase 1 each of the following:
- Bluefruit EZ-Link - bluetooth modem w/ baud rate detection - http://www.adafruit.com/product/1588
- Arduino Pro Mini 3.3V - https://www.sparkfun.com/products/11114
- Power switch - https://www.sparkfun.com/products/102
- GY-86 - 10 DOF flight control module with MPU6050 + HMC5883L + MS5611 - http://www.amazon.com/Arrela-Control-Ms5611-Hmc5883l-Mpu6050/dp/B00KKJYMO6/
- LiPo Battery - https://www.sparkfun.com/products/731
- LiPo Charger - https://www.sparkfun.com/products/10217 (note you need to cut off the JST connector to fit it in the enclosure)
- Small quantity of stranded ribbon cable.
One of the following, needed to program the arduino. (One use only! Borrow from a friend?)
- FTDI Basic 3.3V - https://www.sparkfun.com/products/9873
- FTDI Cable 3.3V - http://www.adafruit.com/product/70
You can also choose to leave the LiPo charger out of the enclosure for small space savings.
Software
This project uses the FreeIMU library to read the motion sensors and calculate sensor-fused orientation.
Arduino
We are using the straight FreeIMU_quaternion example from FreeIMU v0.4. This reads the attached sensors, calculates the AHRS quaternion, and transmits via serial print. I've attached a copy of the FreeIMU_quaternion code here with the baud rate set to 38400, the max rate for the Arduino Pro Mini.
You should only need to upload this to your arduino once.
Processing
This is the demo app in Processing included with FreeIMU v0.4.
- With the headtraker powered on, pair your computer with the bluefruit device.
- Change the serial port screen to match your bluefruit device, for example /dev/tty.AdafruitEZ-Link3e2f-SPP on my system.
- Run the example. Press 'h' to store the home position.
Python
Simple python program to read from the IMU headtracker and record to file. Additionally opens second serial device and feeds values to pan-tilt camera in matching orientation.
Supercollider
coming soon... :)
Enclosure
3d Printing
Solidworks Files - File:btht_solidworks.zip
STL Files - File:btht_enclosure_stl.zip
Assembly Instructions
Reference
other intertial Measurement Units
Head-tracking with the MPU6050
- using Wire interface - http://www.varesano.net/blog/fabio/initial-tests-freeimu-v04-and-mpu6050
- using i2cdevlib - https://github.com/jrowberg/i2cdevlib/tree/master/Arduino/MPU6050/Examples/MPU6050_DMP6
- http://www.geeetech.com/wiki/index.php/MPU-6050_Triple_Axis_Accelerometer_%26_Gyro_Breakout
- IMU - https://dev.qu.tu-berlin.de/projects/sf-razor-9dof-ahrs/wiki/Tutorial
- https://www.sparkfun.com/products/11028 or even cheaper from Amazon
Example with Arduino Nano
GY-80
GY-86