[[Photogrammetry]]
==Rhino Interface==
===Tool Panels and Windows===
*'''Rhino Interface''':
[[File:rhino_interface.png|1000px]]
<!--
<gallery widths=240px mode="nolines" >
File:rhino_objects_toolpanel.png|Tools
File:rhino_layers_toolpanel.png|Layers
File:rhino_objects_toolpanel.png|Objects
</gallery>
-->
<!--
*'''Tools''':
[[File:rhino_tools.png|120px]]
*'''Layers''':
[[File:rhino_layers_toolpanel.png|240px]]
*'''Objects''':
[[File:rhino_objects_toolpanel.png|240px]]
-->
===View===
*'''Zoom, Zoom Extents, Zoom Extents All''':
[[File:rhino_zoom.png | 160px]]
==Modeling in Rhino==
===Basic 2D Modeling===*'''Points, Lines, Curves, Arcs, Circles, Elilpses, Rectangles, Polygons''':[[File:rhino_curves.png|120pxRhinoTutorial]]*'''Join, Explode, Trim, Split''':[[File:rhino_join_trim.png|120px]]===Grid and Snaps===*'''Grid, Ortho, Planar, SmartTrack, Gumball, History''':[[File:rhino_grid_ortho.png | 400px]]*'''Object Snaps''':[[File:rhino_object_snaps.png|200px]]===Solids===*'''Solid Creation''':[[File:rhino_solids.png|200px]]*'''Extrusion''':[[File:rhino_extrude.png|300px]]===Booleans======Meshes======Convert Model Units to Millimeters===*Convert to millimeters. In the menu select '''File->Settings'''.*Under "Units", select "millimeters":[[File:rhino_select_units_mm.png|400px]]*Confim that yes, you would like to scale the model (for ex. each inch is 25.4mm):[[File:rhino_scale_model.png|300px]]*You should see your scaled model:[[File:rhino_scaled_dog.png|600px]]===Exporting as STL==='''NOTE: When exporting, make sure you are using millimeters as your model units.''' ([http://wiki.roberttwomey.com/Ysu3dp#Convert_Model_Units_to_Millimeters convert model to mm])*Select your model to print. *In the file menu, select '''File'''->'''Export Selected''':[[File:rhino_export_selected.png|200px]]*Choose "STL (Stereolithography) (stl)" in the file type dropdown, and give your file a name:[[File:rhino_export.png|400px]]*Accept the default mesh options: [[File:rhino_stl_mesh_options.png|400px]]*Make sure "Export open objects" is not selected (slicing software needs watertight, closed objects):[[File:rhino_stl_no_eport_open.png|400px]]*Click "Export". This saves out a stl file. Now you are ready to go to the slicing section below.
==Slicing==
